Manutenção. Cuidados a ter, erros comuns.
#1

Boas, apareceu-me um artigo (em inglês), que apesar de não trazer propriamente nada de novo achei interessante.
É sobre os principais erros de manutenção que a malta comete, ou por serem maçaricos ou por falta de zelo/ descuido... mesmo alguem que já anda nisto há algum tempo de vês em quando descura nestas coisas.

Fica aqui, para informação:
Top 10 Motorcycle Maintenance Fails

1. Not Maintaining Proper Tire Pressure
Motorcycles, cars, trucks, you name it—there are millions of vehicles out on the road with under-inflated tires, which reduces gas mileage and makes the tires run hot, shortening their lifespan. (You can also over-inflate tires, but it’s less common.) Some people check their tire pressure before every ride—not a bad idea, especially if you’re on a multi-day tour—but do it at least once a week or at every fill-up. Check your tires when cold, use your own tire gauge (keep one in your toolkit or saddlebag) and follow inflation guidelines printed on the VIN plate on your bike or in the owner’s manual (#10). When checking tire pressure, also inspect for foreign objects that may be stuck in your tires and for signs of wear or other damage.

2. Wasting Money on Premium Fuel When Your Bike Doesn’t Need It Cá usa-se o indice RON é uma "escala" diferente
Your bike’s owner’s manual (#10) or a sticker on the fuel tank will tell you the minimum octane fuel (PON, or pump octane number) that your motorcycle requires. Many of today’s motorcycles require premium fuel (typically 90 PON or higher), but some modern motorcycles and many older ones require only regular fuel (usually 86 or 87 PON). Running lower-than-recommended octane fuel is very bad; it can cause detonation (knocking) and potentially damage the engine. Running higher-than-recommended octane fuel wastes money at the pump (don’t fall for the gasoline companies’ marketing about high-octane fuel being “better”; it won’t boost performance and the EPA requires all fuel grades to have engine-cleaning detergent additives), and it can reduce gas mileage.

3. Not Regularly Checking and Changing the Oil
All internal combustion engines have reciprocating metal parts that require proper lubrication to reduce friction and heat. Some engines, especially older ones with worn seals, gaskets and piston rings, will consume oil, either by burning it up in the combustion chamber or simply leaking out. Get in the habit of checking your oil level—some motorcycles have sight glasses, others have dipsticks—every time you fill up the gas tank. And refer to your owner’s manual (#10) for the recommended oil change interval (in miles and/or months). Oil filters collect dirt, debris and metal particles, so make sure to install a new oil filter when you change the oil.

4. Forgetting to Clean, Lube and Adjust the Chain
If your motorcycle has chain final drive, neglecting to clean, lubricate and adjust the chain is asking for trouble. (Drive belts don’t need to be lubricated, but they should be regularly inspected for wear and proper adjustment.) If you have an older bike it may have a non-sealed chain (which requires more care and maintenance), but most contemporary motorcycles have O-ring chains, which have small rubber O-rings between the link plates and rollers that help keep lube in and dirt out. Most owner’s manuals recommend lubricating the drive chain every 400-500 miles, but if you ride in wet or dirty conditions, you should lube the chain more often, perhaps every day. If possible, before adding lube, clean the chain with a non-wire brush and mild soap. Lubricate the chain after a ride, when the chain is warm, to help the lube penetrate the small spaces between the O-rings, plates and rollers, and use a dedicated motorcycle chain lube, such as Spectro Oils Z-Clean Chain Lube. With the bike in neutral and up on its centerstand or a rear-wheel paddock stand, spin the rear wheel forward and spray the lube on the top of the lower chain, just before it comes in contact with the rear sprocket. Wipe off any excess and spin the rear wheel a few more times to help the lube work its way in. Once the chain has been cleaned and lubed, check for proper chain tension, make any necessary adjustments and check the chain and sprockets for wear.

5.Not Using Fuel Stabilizer or Draining the Carbs During Short-Term Storage
Those of you with fuel-injected bikes, count yourselves lucky and move on. But if your motorcycle has carburetors and it sits for more than a couple of weeks between rides (hello, winter!), it’s teeny-tiny jets and other parts can become clogged or gummed-up by old fuel that breaks down over time and creates sticky varnish. Regularly using a fuel stabilizer such as StarTron and draining the carburetor’s float bowl after a ride when the bike will be parked for a while (the easiest way is to turn the fuel off and let the bike run in neutral until it conks out) are the best ways to protect your carbureted fuel system against the scourge of today’s ethanol-blended gasoline.

6 Forgetting to Lube and Adjust the Throttle, Clutch and Brake Cables
The control cables that actuate the throttle, clutch and brakes are absolutely critical components that are often overlooked, a simple matter of “out of sight, out of mind.” A sticky cable that doesn’t move back and forth properly can be dangerous, and a broken cable can leave you stranded in the middle of nowhere. According to Motion Pro, which makes a wide variety of motorcycle tools, cables and controls, motorcycle control cables should be lubricated and adjusted at least once per riding season and more frequently for dual-sport and off-road bikes that see much more wear and tear. We recommend reading Motion Pro’s handy how-to guide “Cable Maintenance 101.” Motion Pro also makes a handy Cable Luber ($9.99) and sells Cable Lube ($15.99 for a 6 oz. can).

7. Not Using a Battery Maintenance Charger
Even if your bike is parked safely in the garage, over time its battery will self-discharge. Allowing the battery to discharge can lead to sulfation—the build-up of lead sulfate crystals—which can result in a loss of cranking power (your bike won’t start), longer charging times and, ultimately, shorter battery life. The best way to keep your motorcycle’s battery healthy is to use a smart maintenance charger such as a Deltran Battery Tender. It has “microprocessor controlled power electronic circuitry” which enables it to perform and control various charging functions, including battery testing, bulk charging and float/maintenance charging to keep the battery in optimal condition.

8. Not Checking and Changing the Final Drive Oil.
Many touring riders love motorcycles with shaft final drive because of their cleanliness and low maintenance. Although heavier than chain final drive, shafties don’t fling chain lube onto the swingarm or rear fender and they don’t need to be adjusted or replaced like chains and sprockets. But the gears inside shaft drives are lubricated with oil that needs to be checked regularly (in case there are leaks or it has become contaminated) and changed according to the recommended service interval in the owner’s manual (#10). Our Yamaha Super Ténéré ES long-term test bike, for example, needs its final drive gear oil changed during the initial break-in service (at 600 miles) and every 16,000 miles thereafter. That’s a long enough interval to easily forget about or ignore, but the consequences can be very costly—replacing a damaged final drive is much more expensive than replacing a chain and sprockets.

9. Not Changing the Brake Fluid
This is another one that’s easy to overlook. Hydraulic brakes work extremely well, especially modern triple-disc systems with ABS, but for brakes to work properly the hydraulic fluid must be changed regularly. Glycol-ether (DOT 3, 4, and 5.1) brake fluids are hygroscopic, which means they absorb moisture, which contaminates the fluid over time. Most motorcycle owner’s manuals (#10) recommend changing brake fluid every two years and replacing the brake hoses every four years. Sticking to these service intervals, as well as checking and replacing your brake pads as needed, are critical for the safe and optimal operation of your motorcycle.

10. Not Reading the Owner’s Manual
There are a lot of references to #10 in this list because your motorcycle owner’s manual is an important source of maintenance information. Very few people read their owner’s manual cover-to-cover, but it’s a good idea to at least flip through it and become familiar with its contents. Most owner’s manuals have sections on safety, general information, specifications, routine maintenance/adjustment, troubleshooting, warranty information and a maintenance/service log. Your owner’s manual contains information about proper tire pressure (#1), fuel type (#2), checking and changing oil (#3), load capacity, suspension settings and much more. If possible, keep your owner’s manual on your bike (under the seat or in a saddlebag), sealed in a durable plastic bag. Buying the service manual for your particular model is also a good idea; keep it in your garage with your tools for handy reference.

Link do artigo : http://ridermagazine.wpengine.com/latest...fails.htm/

Como estes há outros erros/esquecimentos e cuidados a ter. Se se forem lembrado, faz favor de escrever blink

Blog com fotos de passeios de mota em: http://naosougajodefazerblogs.blogspot.pt/
Cumprimentos "V"!
--Cláudio A. B. Silva--
Responder
#2

Muito bom! thumbsup

Suzuki SV1000S '04  cool
Responder
#3

clap clap clap
Responder
#4

No fundo, tudo operações fáceis de fazer, que não requerem grandes capacidades técnicas, mas que descuidamos de forma negligente!

I just don't run with the crowd!

www.loneriderendlessroad.com
Responder
#5

Boa partilha. thumbsup

Boas curvas! 
Responder
#6

Muito bom.

Há um par de ferramentas/geringonças das quais não abdico. Depois meto as que uso, se tiverem algo fora do normal que usem e gostem partilhem.
Responder
#7

A Dina pá!
Uma indispensável em qualquer garagem... cool

I just don't run with the crowd!

www.loneriderendlessroad.com
Responder
#8

(28-10-2016 às 16:32)LoneRider Escreveu:  A Dina pá!
Uma indispensável em qualquer garagem...  cool

As Dinas

[Imagem: SM4eYt9.png]
Responder
#9

Mas uma Dina em condições.... prendada.... que não seja mentirosa..... e que dê os "traques" no momento certo.... custa os olhos da cara! blink

Ainda há tempos o Lidl tinha uma.... mas tive medo que fosse das mentirosas! lol

[Imagem: QKmafvp.png]
Responder
#10

Dina? alguém elucida aqui o noob se faz favor? O_O

XJ 600 Diversion Owner!
Responder




Utilizadores a ver este tópico: 1 Visitante(s)